Verification and calibration of measuring instruments
Who needs it and when
- The measuring instrument is used in the sphere of state regulation (areas where measurements are regulated by law) – it is verified before being placed on the market, after repair and during operation
- Periodic verification is due
- The verification mark or seal is damaged, the verification certificate is lost, or the instrument is put into service after storage – unscheduled verification is needed
- The instrument is not subject to mandatory verification, but you need confirmed values traceable to measurement standards – calibration is carried out
- A state inspector has found unverified measuring instruments
Legal basis
- Law of the Republic of Kazakhstan No. 53-II of 7 June 2000 "On Ensuring the Uniformity of Measurements", Articles 19 and 20adilet.zan.kz
- Rules for the Verification of Measuring Instruments, Order of the Minister for Investments and Development of the Republic of Kazakhstan No. 934 of 27 December 2018adilet.zan.kz
Steps and timeframes
- 01
List of instruments
1 dayWe check the instruments against the register, the verification intervals and the verification procedures.
- 02
Application and handover of instruments
Verification is carried out in a laboratory or at the place of operation. The instrument is handed over clean, with its equipment passport and the previous verification certificate.
- 03
Verification or calibration
Verification is performed by attested verification officers of accredited organizations, following the verification procedure.
- 04
Certificate
up to 15 business daysThe verification certificate is issued within 15 business days of verification. If the instrument is unfit for use, a notice of unsuitability is issued.
Total timeframeThe verification certificate is issued within 15 business days of verification
What we need from you
- List of measuring instruments: type, serial number, quantity
- Instrument passports and verification procedures, if available
- Previous verification certificates
- Where you would prefer verification to take place: in a laboratory or on site
Cost
Depends on the facility and the scope of work. We will give you a quote within 1 business day.
Send a request or message us on WhatsApp – we will review your information and quote the price and timeframe.
Frequently asked questions
How is verification different from calibration?
Verification is mandatory for measuring instruments in the sphere of state regulation: it confirms that the instrument meets the established requirements. Calibration is voluntary: it determines the actual values and measurement uncertainty. Calibration is mandatory only for measurement standards.
How often does an instrument need to be verified?
The verification interval is set during type approval or metrological attestation. The date of the next verification is stated in the verification certificate.
What is the penalty for using an unverified instrument?
A fine under Article 419 of the Code of Administrative Offences of Kazakhstan: 230 MCI (monthly calculation index) for small businesses, 310 MCI for medium-sized businesses and 600 MCI for large businesses. The inspector may also prohibit the use of the instrument.
Do indicators need to be verified?
No. Indicators without standardized accuracy are not subject to verification.
Related services
Get a quote
Send a request
Describe your task – we will calculate the cost and timeframe within 1 business day.